Loading... Please wait...
  • https://secure.fruitridgetools.com/Images/3MSSC1001-10PK-2.JPG
  • https://secure.fruitridgetools.com/Images/3MSSC1001-10PK-3.JPG
  • https://secure.fruitridgetools.com/Images/3MSSC1001-10PK-1.JPG
$4.95 Flat Rate Shipping

3M

10 3M Red Solder Insulator Seal Splice Connectors No Crimp #24 - #14 AWG SSC1001

Your Price: $7.99
SKU
MPN:
SSC1001
3MSSC1001-10PK
UPC:
051138478278
Condition:
New
Weight:
0.05 LBS
Availability:
Most orders ship same day if received by 2:00 pm EST Mon-Fri and 12:00 pm EST Sat. Some larger orders or items that require special handling may be shipped next business day.

$4.95 Flat rate shipping on all orders to the 48 contiguous United States.
Order more than $75 and it ships free !!
Ready to Ship:
Out of stock

Out of Stock

Product Description

The 3M SSC1001 red solder splice connector is a simple, one-piece design. The outer layer is a tube of tinted, translucent, polyolefin heat-shrinkable tubing lined with hot melt sealant, which provides both insulation and a moisture seal, and allows easy inspection of the solder connection. Inside the tubing is a wire-locking metal barrel that holds a fluxed solder disk. After the wires are inserted and held in place by the barrel wire lock, heat is applied and three events occur: The solder disk melts and connects the wires, Tubing inner wall melts and flows, forming a moisture seal, and The tough polyolefin outer wall shrinks, forming the electrical insulation. The SSC1003 will successfully solder any wire or combination of wires that can be easily inserted. However, successful sealing around the wire bundle is dependent on the size and number of wires. Remember, however, that 3M Solder Splice Connectors are not tied to specific wire gauges; each reliably splices a wide range of sizes. Each is individually packaged; packaging may differ from photos. Features include:
  • Built-in wire lock ensures proper wire placement
  • No crimping required; only a standard hat gun designed for solder-type connectors is needed
  • Creates a strong connection; pull out strength: 150 lbs. typical
  • Meets ABYC requirements for moisture resistance and pull-out strength
  • UL recolonized for 600 V and 125 Deg C, and recognized for 1000 V for use on signs, lighting, and luminaries
  • Translucent cross-linked polyolefin with adhesive/sealant inner liner
  • Tin-Plated cartridge brass barrel
  • Approx 1-2 Wires ranging from 24-22 AWG
  • Approx 1 wire ranging from 20-14 AWG
  • 1.37" Full length; .83" Barrel length; .18" Inner Diameter width

Product Reviews

 ​