Leviton White Light Dimmer Power Extender Fluorescent 1920VA 120V Mark 10 Hi-Lume PE200-10W

Leviton PE200-10W white Architectural Grade power extender. Increases dimming zone capacity to full 1920VA@120V for Mark 10 Powerline, Hi-Lume, or equivalent dimmable fluorescent ballasts (120V versions only). Emulates the characteristics of the dimmer that it is connected to in terms of dimming range and resolution. Features include:

• Rated 1920VA 120VAC 50/60 Hz for Mark 10 Powerline, Hi-Lume, or equivalent dimmable fluorescent ballasts (120V versions only)
• Powered by a 20A circuit from a circuit breaker; does not need to be on the same phase as the power control unit
• Low-end adjustment available for setting the minimum brightness level
• Can be surface- or flush-mounted using 1900 Box and 2-gang raised cover
• Aluminum heat sink with snap-on white cover
• Measures 4.72"h x 4.5"w; projects 11/16" from wall surface

Compatability:

• Works with Dimensions 3200 Series Multizone controller/dimmer to extend load capacity on any zone configured to work with fluorescent loads. Refer to D3200 User Guide for details
• Extends the load capacity of Leviton 120V 600VA Mark X fluorescent box-mounted dimmers including the following (Mark 10 versions only): Illumatech, Sureslide, Mural, and Touch Point
• Works with all families of Architectural Systems
• Please note: if dimmer has a Neutral wire it must be connected.