Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Pass & Seymour Light Almond 1050 sq ft PIR Passive Infrared Wall Switch Occupancy Sensor 120V/277V 800/1200W WSP250-LA

Your Price: $44.99

*Same Day Shipping

QTY Available to Ship:

Product Description

Pass & Seymour WSP250-LA light almond PIR automatic occupancy sensor wall switch. It is rated for 800W at 120V for incandescant lights. It is also rated for 1200W at 277V for Fluorescent Lights. This is a single pole, back and side wired, grounding, 120/277VAC, 60Hz, 1/6HP, time delay of 30 sec. - 30 min., 180 degree field of view up to 1050 sq. ft. Each is individually packaged; packaging may differ from photos. Features include:
  • ASIC provides high immunity to RFI and EMI
  • 180 degree coverage of up to 1050 sq. ft
  • Compact, decorator design replaces existing wall switch
  • Dual 1 20/277VAC operation
  • Integrated light level sensor works from 2 to 200 footcandles
  • Compatible with all electronic ballasts and PI lamp ballasts
  • No minimum load requirement
  • 30% to 60% energy savings
  • Adjustable sensitivity from 20% to 100%
  • Patented voltage drop protection
  • Patent Pending Zero Crossing Circuitry
  • Positive detection indicator

  • Small, individual offices
    • Sensors should have a direct, clear, front view of stationary occupants. Be sure sensors will not be blocked by doors, filing cabinets, etc
  • Small conference rooms under 300 sq. ft
    • To ensure detection at the far end of a room, it is recommended that the wall switch sensor be within 20 feet of the farthest wall
  • A wall sensor is suitable for break rooms up to 300 sq. ft.
    • If there is a clear view of the room from the light switch. For a room with an open wall that leads to other areas, masking material is included so the coverage zone may be more tightly defined. Using a CS1001 ceiling mount sensor is an alternative to masking
  • In copy and work rooms smaller than 300 sq. ft
    • An automatic switch works well; however, if large copiers block the sensor's view, use a ceiling mount PIR sensor
  • An automatic wall switch sensor will work well in a utility room smaller than 300 sq. ft.
    • However, if occupants spend lengthy periods of time behind cabinets or other structures, an ultrasonic sensor is a better choice

    Cross Reference:
    Not Available
    Light Almond

    0.40 LBS
    Most orders ship same day if received by 2:00 pm EST Mon-Fri and 12:00 pm EST Sat. Some larger orders or items that require special handling may be shipped next business day.
    $4.95 Flat Rate Shipping

Product Reviews